Engine Kits

Torque Converters - B&M Hole Shot 2400 Series

B&M Hole Shot 2400 Torque Converters is a higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!

Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated.

HoleShot™ 2400 Series - 2300-2500 RPM, 11" diameter, Mild to Medium Performance. B&M’s best street/strip converters



This product is in the following categories:

HomeDrivetrainTorque Converters

Manufacturer:

B&M

Part #: 10415

Chrysler 67-81 Torqueflite A-727 (1& 6) (10415 has 11-1/8" Bolt Circle)
Price: $431.38
Quantity:

Part #: 20412

GM 68-81 TH350, TH375B (5)&(6),TH375, TH400, TH425 (5)&(4)
Price: $375.99
Quantity:

Part #: 40412

Ford 66-91 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848" crank pilot (3)
Price: $495.99
Quantity:

Part #: 40422

Ford 71-91 C6 289, 302, 351w 351C, 351M, 400, 460 cid with 1.375" crank pilot (3)
(3)Ford C6 converters are supplied with an 11-7/16" dia. bolt circle mounting pattern, may require a flexplate change.
Price: $431.38
Quantity:

Part #: 40430

Ford 80-92 AOD with 11.4" bolt circle, 1.375" crank pilot(2)
Price: $615.09
Quantity:

Part #: 50412

Ford 66-69 step case C4 with 10.5" bolt circle, 24 spline input shaft, 1.375" crank pilot.
Price: $351.99
Quantity:

Part #: 50416

Ford 70-82 step case C4 with 10.5" bolt circle, 26 spline input shaft, 1.375" crank pilot.
Price: $431.38
Quantity:

Part #: 70411

GM 62-73 Aluminum Case Powerglide
Price: $351.99
Quantity:

Part #: 70419

GM 84-91 TH-700-R4 30 spline
Price: $415.99
Quantity: