Engine Kits

Power+Plus Hurricane Manifolds

Power+Plus Hurricane Manifolds. The Hurricane is one of our most popular race manifolds. If you are looking for the utmost performance for the least cost, this is your manifold. For all-out racing with small to medium-cubic-inch engines, the Hurricane+Plus is the manifold for you. For large inch engines (420+) on gas or alcohol, the Super Hurricane is the manifold to select.

Power+Plus Hurricane Manifolds line of performance intake manifolds. As a result, Professional Products have been able to incorporate many new features in their manifolds not found in competitive models. Some of today’s most popular manifolds were designed 30 years ago and the makers have never bothered to update the tooling to include many of the new features desired by performance enthusiasts. Professional Products engineered those features into their manifolds.
Dual Distributor Holddowns Carburetor Adapter Plate
   
Sometimes the standard single distributor hold-down is difficult to access. So Professional Products have provided dual distributor hold-downs on all Power+Plus Chevy intake manifolds, which gives you an optional position.  And on their 52030 and 52031 Racing Manifold, you can use two hold-downs for extra protection against distributor rotation.

Many Chevy manifolds accept the stock Rochester Quadra-Jet spread-bore carb. But if you want to use one of the popular Holley or Edelbrock square bore carbs, you have to spend more bucks for a carb adapter plate. Power+Plus manifolds with spread- bore patterns include steel adapter plates and gaskets to accept square bore carbsBosses FourBaffle Special. Included with manifold

Nitrous Bosses Four Corner Water Ports
   

If you want to run nitrous with the injectors mounted directly in the ports, Power+Plus Manifolds provide a simple solution. Many of their manifolds include cast-in nitrous bosses which provide the extra thickness not found in most competitive manifolds without spending a lot more money. This extra thickness is necessary to provide the proper amount of thread engagement All you have to do is drill and tap the bosses to accept any manufacturer's nitrous injectors.
All of Professional Products performance manifolds feature two extra water ports at the rear of the manifold, a feature normally only found in manifolds costing hundreds more. Some enthusiasts have found that plumbing a line between these two rear ports can reduce engine overheating. Many racers also find these ports to be an advantageous special feature for plumbing special additional water lines
Water Divider Baffle Special Manifold Adapters
   
The Power+Plus #52030/52031 Manifold is designed for both racing and street applications. It has all the necessary bosses and tapped holes to accommodate street accessories yet it also includes every feature found in manifolds costing hundreds more. One trick feature is the Water Divider Baffle. Expensive race manifolds have this baffle cast in place in the manifold but this precludes the use of a thermostat if you want to use one. The Power+Plus Manifold is machined for a thermostat but the package also includes a drop-in Water Divider Baffle for those who desire this feature. All Power+Plus Street and High Performance Street Manifolds for small block Chevy's come with special adapters that allow these manifolds to fit the '87-'95 cast iron heads. If you have '86 or earlier heads, or '87-'95 aluminum heads, their manifolds bolt right on without the adapters. For '87-'95 cast iron heads, drop the adapters in the four slotted holes and bolt up the manifold with no fuss and no special tools required.

 



This product is in the following categories:

HomeAir And FuelIntake Manifolds

Manufacturer:

Professional Products

Part #: 52030

SB Chevy Power+Plus Hurricane Polished Manifold
Price: $225.99
Quantity:

Part #: 52031

SB Chevy Power+Plus Hurricane Satin Finish Manifold
Price: $175.99
Quantity:

Part #: 52032

SB Chevy Vortec (Gen 1+) Hurricane Polished Manifold
Price: $250.99
Quantity:

Part #: 52033

SB Chevy Vortec (Gen 1+)Hurricane Satin Finish Manifold
Price: $195.99
Quantity:

Part #: 52036

1957-'95 Small Block Chevy V8 Polished Super Hurricane Carburetor Racing Manifold
Price: $289.84
Quantity:

Part #: 52037

1957-'95 Small Block Chevy V8 Satin Super Hurricane Carburetor Racing Manifold
Price: $238.43
Quantity:

Part #: 52039

1957-'95 Small Block Chevy V8 Satin Super Hurricane with Machined Injector Ports Racing Manifold
Price: $261.80
Quantity:

Part #: 53030

BB Chevy with Rectangular Ports Power+Plus Hurricane Polished Manifold
Price: $250.99
Quantity:

Part #: 53031

BB Chevy with Rectangular Ports Power+Plus Hurricane Satin Finish Manifold
Price: $179.99
Quantity:

Part #: 53034

Big Block Chevy Hurricane™ with Dominator Polished
Price: $299.20
Quantity:

Part #: 53035

Big Block Chevy Hurricane™ with Dominator Satin
Price: $220.99
Quantity:

Part #: 53036

BB Chevy with Oval Ports Power+Plus Hurricane Polished Manifold
Price: $267.99
Quantity:

Part #: 53037

BB Chevy with Oval Ports Power+Plus Hurricane Satin Finish Manifold
Price: $183.99
Quantity:

Part #: 54030

SB Ford (260-289-302) Power+Plus Hurricane Polished Finish Manifold
Price: $299.20
Quantity:

Part #: 54031

SB Ford (260-289-302) Power+Plus Hurricane Satin Finish Manifold
Price: $205.71
Quantity:

Part #: 54032

SB Ford (351W) Power+Plus Hurricane Polished Manifold
Price: $289.84
Quantity:

Part #: 54033

SB Ford (351W) Power+Plus Hurricane Satin Manifold with F.I. Bosses
Price: $210.37
Quantity:

Part #: 54034

SB Ford (351W) Power+Plus Hurricane Polished Manifold with F.I. Bosses
Price: $299.20
Quantity:

Part #: 56030

Pontiac 326 - 455 V8's Power+Plus Hurricane Single Plane Racing Manifold with Polished Finish
Price: $280.50
Quantity:

Part #: 56031

Pontiac 326 - 455 V8's Power+Plus Hurricane Single Plane Racing Manifold with Polished Finish
Price: $205.71
Quantity:

Part #: 56033

Pontiac 326 - 455 V8's Power+Plus Hurricane Single Plane with machined injector bosses Racing Manifold with Satin Finish
Price: $205.71
Quantity: