Engine Kits

Power+Plus Typhoon Manifolds

Power+Plus Typhoon Manifolds The Typhoon manifolds, along with the similar CrossWind, are the most powerful dual plane manifolds available. For non-pollution controlled street machines, these are among the very best manifolds you can use.

Power+Plus Typhoon Manifolds feature a square bore carburetor flange, nitrous bosses, four corner water ports, and dual distributor holddowns. These manifolds are approximately 5/8" taller than the Cyclone series. On medium horsepower engines, dyno tests have shown that this manifold comes very close to producing similar power and torque numbers as the Hurricane racing intake manifold.

Some of today’s most popular manifolds were designed 30 years ago and the makers have never bothered to update the tooling to include many of the new features desired by performance enthusiasts. Professional Products engineered those features into their manifolds.

Dual Distributor Holddowns Carburetor Adapter Plate
Sometimes the standard single distributor holddown is difficult to access. So Professional Products have provided dual distributor holddowns on all Power+Plus Chevy intake manifolds, which gives you an optional position.  And on their 52030 and 52031 Racing Manifold, you can use two holddowns for extra protection against distributor rotation.

Many Chevy manifolds accept the stock Rochester Quadra-Jet spread-bore carb. But if you want to use one of the popular Holley or Edelbrock square bore carbs, you have to spend more bucks for a carb adapter plate. Power+Plus manifolds with spread- bore patterns include steel adapter plates and gaskets to accept square bore carbs. Included with manifold

Nitrous Bosses Four Corner Water Ports

If you want to run nitrous with the injectors mounted directly in the ports, Power+Plus Manifolds provide a simple solution. Many of their manifolds include cast-in nitrous bosses which provide the extra thickness not found in most competitive manifolds without spending a lot more money. This extra thickness is necessary to provide the proper amount of thread engagement All you have to do is drill and tap the bosses to accept any manufacturer's nitrous injectors.
All of Professional Products performance manifolds feature two extra water ports at the rear of the manifold, a feature normally only found in manifolds costing hundreds more. Some enthusiasts have found that plumbing a line between these two rear ports can reduce engine overheating. Many racers also find these ports to be an advantageous special feature for plumbing special additional water lines
Water Divider Baffle Special Manifold Adapters
The Power+Plus #52030/52031 Manifold is designed for both racing and street applications. It has all the necessary bosses and tapped holes to accommodate street accessories yet it also includes every feature found in manifolds costing hundreds more. One trick feature is the Water Divider Baffle. Expensive race manifolds have this baffle cast in place in the manifold but this precludes the use of a thermostat if you want to use one. The Power+Plus Manifold is machined for a thermostat but the package also includes a drop-in Water Divider Baffle for those who desire this feature. All Power+Plus Street and High Performance Street Manifolds for small block Chevys come with special adapters that allow these manifolds to fit the '87-'95 cast iron heads. If you have '86 or earlier heads, or '87-'95 aluminum heads, their manifolds bolt right on without the adapters. For '87-'95 cast iron heads, drop the adapters in the four slotted holes and bolt up the manifold with no fuss and no special tools required.

This product is in the following categories:

HomeAir And FuelIntake Manifolds


Professional Products

Part #: 52020

Power+Plus Typhoon Polished Manifold for the 23° Heads 1957-95 Chevy Small Block
Price: $196.35

Part #: 52021

Power+Plus Typhoon Satin Manifold for the 23° Heads 1957-95 Chevy Small Block
Price: $154.28

Part #: 54000

Power+Plus Typhoon Polished Manifold 289/302W/5.0L Small Block Ford
Price: $211.08

Part #: 54001

Power+Plus Typhoon Satin Finish Manifold Small Block Ford
Price: $181.63

Part #: 54020

Power+Plus Typhoon Polished Manifold 1986-95 5.0L Small Block Ford Mustang
Price: $598.39

Part #: 54021

Power+Plus Typhoon Satin Manifold 1986-95 Small Block Ford Mustang 5.0L
Price: $504.90

Part #: 54022

Power+Plus Typhoon Polished Manifold Small Block Ford 5.8L 351W
Price: $304.33

Part #: 54023

Power+Plus Typhoon Satin Manifold Small Block Ford 5.8L 351W
Price: $225.80

Part #: 54060

Power+Plus Polished Manifold 1999-04 4.6L 2V Ford Mustang
Price: $514.24

Part #: 54124

Power+Plus Typhoon Polished EFI Upper Plenum 1986-95 Small Block Ford Mustang 5.0L
Price: $331.92

Part #: 54125

Power+Plus Typhoon Satin Finish EFI Upper Plenum 1986-95 Mustang 5.0L
Price: $280.50

Part #: 54126

Power+Plus Typhoon EFI Polished Intake Manifold 1986-95 Ford Mustang 5.0L V8
Price: $299.20