Crankshaft Supply Re-manufactured Stock Cranks. These Crankshaft Supply Mitsubishi Crankshafts are thermal cleaned, steel shot blasted, bolt holes and keyways inspected, centerline checked, straightened and magnafluxed. Necks, flanges and badly worn journals are restored, bearing journal surfaces machined, polished, oil holes chamfered, thoroughly cleaned, with filleted radius to maintain OE specs. Bearings are included with Crankshaft unless noted.
Core Return Policy - Cores returned for credit need to be sent at shippers expense in rebuild-able condition. Return cores "rust-free". We recommend you return it in the package sent to you. To insure prompt credit for your core, enclose a clear copy of your original invoice.
Crankshaft Supply has been repairing and machining Crankshafts, Rods, and more for over 50 years. Crankshaft Supply are the specialists in Crankshaft repair. . Crankshaft Supply is proud of their dedicated staff, and their dedication to your satisfaction
Crankshaft Supply Mitsubishi Crankshaft Kits Are:
Thermal Cleaned
Steel shot blasted
Bolt holes and keyways inspected
Worn journals are restored
bearing journal surfaces are machined, polished
Oil holes chamfered and deburred
Oil line passages clean and rust inhibitor applied
Crankshafts are packed and covered with two-mil poly film and encapsulated with sprayed foam
Main and Rod Bearings are included, unless noted
The poly film is a Rust inhibitor therefor you must wash the entire crank with soap and water at least 6 hours before you install it ( we recommend that you rinse your crank at least three times to remove all traces of soap)
1985-1988 Mirage, 1987-1989 Precis, 1986-1989 Excel 1468cc, 1.5L, Engine Model G15B, G4AJ, Rod Journal width is approximately .850", With Casting Number G1
1989-2000 Mirage, 1990-1994 Excel 1468cc, 1.5L, Engine Model G15B, 4G15, G4DJ. Rod Journal width is approximately .790", Front Seal surface diameter is 1.181". Casting Number G1, T1
1994-2002 Montero, 1997-2004 Montero sport, 1997-2004 Diamante 3496cc, 2.5L, V6, Engine Model 6G74, 6G74DN. Rod Journal diameter is 2.165", With Casting Number 74K1, 94062803G4
May 1984-1988 Cordia & Tredia, May 1984-1989 Pickup, 1989-1992 Eclispse & Galant, 1.8L, Engine Model G62B, G4GM. Crankshaft Neck length is approximately 1-1/2", Flywheel Flange has 6 Bolt Holes. Casting Number 64, GE
1993-1994 Galant, Eclipse 1993-1996 Eclipse Turbo 2.0L, Engine Model 4G63. Flywheel Flange has 7 Bolt holes. Main Bearing set comes with Flanged Main Bearing
1995-1996 Pickup, 1995-1997 Expo, Eclipse & Galant, 1997-1999 Montero Sport 2350cc, 2.4L, Engine Model 4G64, 4G64FR. Thrust Width on #3 Main is 1.005", Rod Thrust width is 1.050". This kit is packed with Flanged Main Bearings. Casting Number AT1, K
1985-1988 Galant, 1985-1992 Van, 1990-1992 Pickup, 1989-1992 Expo. 2350cc, 2.4L, Engine Model G64B, G4CS. Thrust Width on # 3 Main is 1.145", With Casting Number 64