Crankshaft Supply Re-manufactured Stock Cranks. These Crankshaft Supply Acura Crankshafts are thermal cleaned, steel shot blasted, bolt holes and keyways inspected, centerline checked, straightened and magnafluxed. Necks, flanges and badly worn journals are restored, bearing journal surfaces machined, polished, oil holes chamfered, thoroughly cleaned, with filleted radius to maintain OE specs. Bearings are included with Crankshaft unless noted.
Crankshaft Supply Acura Re-manufactured Crank Kits
Core Return Policy - Cores returned for credit need to be sent at shippers expense in rebuild-able condition. Return cores "rust-free". We recommend you return it in the package sent to you. To insure prompt credit for your core, enclose a clear copy of your original invoice.
Crankshaft Supply has been repairing and machining Crankshafts, Rods, and more for over 50 years. Crankshaft Supply are the specialists in Crankshaft repair. . Crankshaft Supply is proud of their dedicated staff, and their dedication to your satisfaction
Crankshaft Supply Acura Crankshaft Kits Are:
- Thermal Cleaned
- Steel shot blasted
- Bolt holes and keyways inspected
- Worn journals are restored
- bearing journal surfaces are machined, polished
- Oil holes chamfered and deburred
- Oil line passages clean and rust inhibitor applied
- Crankshafts are packed and covered with two-mil poly film and encapsulated with sprayed foam
- Main and Rod Bearings are included, unless noted
The poly film is a Rust inhibitor therefor you must wash the entire crank with soap and water at least 6 hours before you install it ( we recommend that you rinse your crank at least three times to remove all traces of soap)
This product is in the following categories:
Crankshafts & Connecting Rods
Part #: 80013
1986-1987 Integra 1590cc, 1.6L, Engine Model D16A1, Flywheel Flange has 6 bolt holes, Neck Diameter is .865".
Part #: 80014
1988-1989 Integra 1590cc, 1.6L, Engine Model D16A1, Flywheel Flange has 6 bolt holes, Neck diameter is .944"
Part #: 80015
1988-1989 Integra 1590cc, 1.6L, Engine Model D16A1, Flywheel Flange has 8 bolt holes, Neck diameter is 1.102"
Part #: 80016
1992-1993 Integra, GS-R, Vigor, V-TEC Engine 1678cc, 1.7L, Double Overhead Cam
Part #: 80017
1994-2001 Integra, GS-R, R Type, 1997-2001, V-TEC Engine 1797cc, 1.8L, Double Overhead Cam, Engine Model B18C1, B18C5
Part #: 80018
1990-2001 Integra - Except GS-R, and V-TEC, 1834cc, 1.8L, Engine Model B18A1, B18B1
Part #: 80019
1997 2156cc, 2.2L, Engine Model F22B1, Crankshaft has a 16mm bolt hole in neck.
Part #: 80020
1992-1994 Vigor 2456cc, 2.5L, Engine Model G25A1
Part #: 80020
1995-1998 2456cc, 2.5L, Engine Model G25A4
Part #: 80021
1987-1990 Legend 2675cc, 2.7L, V6, Engine Model C27A1. For Engines with housing bore of 2.7165" and 14mm bolt hole in neck.
Part #: 80022
1991-1995 Legend 3206cc, 3.2L, V6, Engine Model C32A1
Part #: 80022
1996-1998 TL 3206cc, 3.2L, V6, Engine Model C32A6
Part #: 92031
1996-1997 Isuzu Engine used in SLX 3165cc, 3.2L, V6, Engine Model 6VD1. Remove reluctor ring from old unit and install on new unit.
Part #: 92032
1998-1999 Isuzu Engine used in SLX 3494cc, 3.5L, V6, Engine Model 6VE1. Remove reluctor ring from old unit and install on new unit