Engine Kits

ARP Head Studs, Ford Small Block

ARP Ford Small Block Head Studs, It is for good reason that virtually every top professional engine builder relies on ARP  head studs for their all-out competition powerplants. Simply stated, there’s not a better stud setup on the market today.

For openers, ARP Ford SB Head Studs Kits uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Then, each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

ARP
Head Stud KitsFollowing heat-treat, each ARP Head Stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It’s important to note that lesser quality studs are not even centerless ground – the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine).

Because ARP Ford SB Head Studs Kits are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned – something that won’t happen with inferior quality head studs.

ARP Head Stud Kits are thread rolled after heat-treat, which gives them about 1000% (that’s ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it’s tough on tooling, but the results are well ARP
Head Studworth the extra effort.

You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the “stretch” of both studs, which makes for a more consistent clamping force – and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing!

Premium quality heat-treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications. You won’t find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality.

ARP Ford SB Head Studs Kits are available with your choice of conventional hex nuts or compact 12-point nuts. Premium quality parallel ground washers are also included with each kit. Clearly, they are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

 

ARP
Head Stud Kits
Please read
Head Bolt and Stud Tech Tips
and
HEAD STUDS vs. BOLTS



This product is in the following categories:

HomeBolt Kits, Studs, FastenersHead Bolts and Head Studs

Manufacturer:

ARP Bolts

Part #: 154-4001

Ford Small Block 289-302, 5.0L with factory heads or AFR 185 with 7/16" holes, Hex nuts, ARP Head Studs 154-4001
Price: $125.99
Quantity:

Part #: 154-4002

Ford Small Block Boss 302, Hex nuts, ARP Head Studs 154-4002
Price: $121.00
Quantity:

Part #: 154-4003

Ford Small Block 351 Windsor with factory heads, M-6049-J302, SVO high port and M-6049-L302 GT-40 style, Edelbrock aluminum and Iron Dart with 1/2"-13 cylinder block threads, Hex nuts, ARP Head Studs 154-4003
Price: $161.99
Quantity:

Part #: 154-4004

Ford Small Block 351 Cleveland, 351-400M, Hex nuts, ARP Head Studs 154-4004
Price: $177.99
Quantity:

Part #: 154-4005

Ford Small Block 289-302, 5.0L with 351 Windsor head, 7/16"-14 cylinder block thread M-6049-J302, SVO high port & M-6049-L302, AFR 185 with 1/2" holes Edelbrock aluminum, GT-40 style with insert "T" washer, Hex nuts, ARP Head Studs 154-4005
Price: $166.99
Quantity:

Part #: 154-4201

Ford Small Block 289-302, 5.0L with factory heads or AFR 185 with 7/16" holes, 12-point nuts, ARP Head Studs 154-4201
Price: $145.99
Quantity:

Part #: 154-4202

Ford Small Block Boss 302, 12-point nuts, ARP Head Studs 154-4202
Price: $138.65
Quantity:

Part #: 154-4203

Ford Small Block 351 Windsor with factory heads, M-6049-J302, SVO high port & M-6049-L302 GT-40 style, Edelbrock aluminum and Iron Dart with 1/2"-13 cylinder block threads, 12-point nuts, ARP Head Studs 154-4203
Price: $205.99
Quantity:

Part #: 154-4204

Ford Small Block 351 Cleveland, 351-400M, 12-point nuts, ARP Head Studs 154-4204
Price: $222.99
Quantity:

Part #: 154-4205

Ford Small Block 289-302, 5.0L with 351 Windsor head, 7/16"-14 cylinder block thread M-6049-J302, SVO high port & m-6049-L302, AFR 185 with 1/2" holes Edelbrock aluminum, GT-40 style with insert "T" washer, 12-point nuts, ARP Head Studs 154-4205
Price: $186.99
Quantity:

Part #: 254-4101

Ford Small Block 351 SVO and Fontana aluminum blocks with 1994 or later Yates heads, Hex nuts and under cut studs, ARP Head Studs 254-4101
Price: $216.88
Quantity:

Part #: 254-4102

Ford Small Block 351 SVO and Fontana aluminum blocks with 1994 or later Yates heads, Hex nuts, ARP Head Studs 254-4102
Price: $138.18
Quantity:

Part #: 254-4107

Ford Small Block 351 SVO high port and improved SVO high port, M-6049-C302, M-6049-C320B, Hex nuts, ARP Head Studs 254-4107
Price: $186.91
Quantity:

Part #: 254-4109

Ford Small Block 351 SVO Yates design, Hex nuts, ARP Head Studs 254-4109
Price: $156.07
Quantity:

Part #: 254-4110

Ford Small Block 351 SVO Yates 1994 design, Hex nuts, ARP Head Studs 254-4110
Price: $156.07
Quantity:

Part #: 254-4111

Ford Small Block 351 "R" block with C3 heads, Hex nuts, ARP Head Studs 254-4111
Price: $158.35
Quantity:

Part #: 254-4112

Ford Small Block 351 "R" block with 6049-N351 heads, Hex nuts, ARP Head Studs 254-4112
Price: $121.97
Quantity:

Part #: 254-4113

Ford Small Block Standard 351 block with 6049-N351 heads, Hex nuts, ARP Head Studs 254-4113
Price: $135.53
Quantity:

Part #: 254-4301

Ford Small Block 351 SVO and Fontana aluminum blocks with 1994 or later Yates heads, 12-point nuts and under cut studs, ARP Head Studs 254-4301
Price: $253.74
Quantity:

Part #: 254-4302

Ford Small Block 351 SVO and Fontana aluminum blocks with 1994 or later Yates heads, 12-point nuts, ARP Head Studs 254-4302
Price: $241.90
Quantity:

Part #: 254-4307

Ford Small Block 351 SVO high port and improved SVO high port, M-6049-C302, M-6049-C320B
Price: $199.19
Quantity:

Part #: 254-4309

Ford Small Block 351 SVO Yates design, 12-point nuts, ARP Head Studs 254-4309
Price: $191.99
Quantity:

Part #: 254-4310

Ford Small Block 351 SVO Yates 1994 design, 12-point nuts, ARP Head Studs 254-4310
Price: $191.99
Quantity:

Part #: 254-4311

Ford Small Block 351 "R" block with C3 heads, 12-point nuts, ARP Head Studs 254-4311
Price: $187.34
Quantity:

Part #: 254-4312

Ford Small Block 351 "R" block with Brodix/Neal heads or Blue Thunder heads, 12-point nuts, ARP Head Studs 254-4312
Price: $205.80
Quantity:

Part #: 254-4314

Ford Small Block 351 "R" block with 6049-N351 heads, 12-point nuts, ARP Head Studs 254-4314
Price: $212.32
Quantity:

Part #: 254-4315

Ford Small Block Standard 351 block with 6049-N351 heads, 12-point nuts, ARP Head Studs 254-4315
Price: $190.01
Quantity:

Part #: 254-4401

Ford Small Block 289-302, 5.0L with factory heads or AFR 185 with 7/16" holes, Hex nuts and under cut studs, ARP Head Studs 254-4401
Price: $118.02
Quantity:

Part #: 254-4405

Ford Small Block 289-302, 5.0L with 351 Windsor head, 7/16"-14 cylinder block thread M-6049-J302, SVO high port & M-6049-L302, AFR 185 with 1/2" holes Edlebrock aluminum, GT-40 style with insert "T" washer, Hex nuts and under cut studs, ARP Head Studs 254-4405
Price: $153.80
Quantity:

Part #: 254-4501

Ford Small Block 351 "R" block with C3 heads, Hex nuts and under cut studs, ARP Head Studs 254-4501
Price: $207.77
Quantity:

Part #: 254-4503

Ford Small Block 351 Windsor with factory heads, M-6049-J302, SVO high port and M-6049-L302 GT-40 style, Edelbrock aluminum and Iron Dart with 1/2-13 cylinder block threads, Hex nuts and under cut studs, ARP Head Studs 254-4503
Price: $177.26
Quantity:

Part #: 254-4601

Ford Small Block 351 "R" block with C3 heads, 12-point nuts and under cut studs, ARP Head Studs 254-4601
Price: $228.24
Quantity:

Part #: 254-4701

Ford Small Block 289-302, 5.0L with factory heads or AFR 185 with 7/16" holes, 12-point nuts and under cut studs, ARP Head Studs 254-4701
Price: $132.77
Quantity:

Part #: 254-4703

Ford Small Block 351 Windsor with factory heads, M-6049-J302, SVO high port and M-6049-L302 GT-40 style, Edelbrock aluminum and Iron Dart with 1/2"-13 cylinder block threads, 12-point nuts and under cut studs, ARP Head Studs 254-4703
Price: $198.48
Quantity:

Part #: 254-4705

Ford Small Block 289-302, 5.0L with 351 Windsor head, 7/16"-14 cylinder block thread M-6049-J302, SVO high port & M-6049-L302, AFR 185 with 1/2" holes Edelbrock aluminum, GT-40 style with insert "T" washer, 12-point nuts and under cut studs, ARP Head Studs 254-4705
Price: $168.57
Quantity: