Comp Cams AMC V8's and Chrysler/Dodge 273 -360, 383 - 440ci (68-present) V8's High Energy Hydraulic Lifters. Not all hydraulic lifters are created equal! The use of High Energy Hydraulic Lifters give you advantages not found in other brands of lifters.
Comps lifters have a patented constant orifice metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine’s rpm range, therefore eliminating excessive oiling at high speeds.
The pushrod seat is made of a special powdered metal iron alloy and heat-treated for strength and wear resistance.
COMP Cams High Energy Hydraulic Lifters are produced with a longer piston than conventional hydraulic lifters. The extra length is made possible from a counter-bored pushrod seat position. The longer piston is produced with through-hardened steel that provides more load bearing surface and increased lifter longevity.
High Energy Lifters have a lightweight check valve disc that allows for quicker response. This results in increases in engine speed before valve float. This check valve also maintains added control at all engine speeds and loads. Increases in engine speed can be attributed to this quicker response check valve.
Brand
COMP Cams
Lifter Link Bars Included
No
Lifter Offset
None
Lifter Outside Diameter (in)
0.904 in.
Lifter Style
Hydraulic flat tappet
Link Bar
None
Part Type
Lifters
Product Line
COMP Cams High Energy Hydraulic Lifters
Quantity
Sold as a set of 16.
Other customers who purchased this product also purchased:
