Engine Kits

Comp Cams Pro Magnum Hydraulic Roller Lifters Tech Tip

Comp Cams Pro Magnum Hydraulic Roller Lifters Tech Tip



Part #: A-1a
List Price: $0.00
Our Price: $0.00
You Save: $0.00



Pro Magnum Hydraulic Roller Lifters All COMP Cams­ roller lifters are shipped with grease coating on the outside shell to prevent rust, and a thick grease in the roller bearing to keep the needles in place during assembly. Prior to installing the lifters in an engine, it is important to wash all of the grease from the lifter and bearing with a suitable solvent or mineral spirits. After blowing the parts dry, totally immerse the lifter in fresh 30W engine oil for 30 minutes. This will ENSURE that the entire roller bearing is filled with oil. After installing the lifters, try not to let the engine sit for an extended period of time prior to startup to minimize the amount of oil that drains out of the bearing.