High Energy Hydraulic Lifter Tech Tips
Part #: A-1b
List Price: $0.00
Our Price: $0.00
You Save: $0.00
High Energy Hydraulic lifter It is not necessary to "pre-pump" hydraulic lifters full of engine oil prior to installation and valve adjustment. It is actually UNDESIRABLE to do so as the "pumped up" lifters will cause the valves to open during the adjustment process, rather than positioning the valve lifter plunger in its operating position as it is supposed to do. "Pre-soaking" hydraulic lifters in a bath of engine oil is a good idea, but it is not mandatory. It does ensure that the lifters are adequately lubricated on their outer surfaces prior to installation in the engine. It may also result in a quieter engine start up as the oil in the bath may displace some air from the lifter’s plunger reservoir.