Click On Image To Enlarge
Pontiac 1965 - 1979 model years with the 326 - 455 V8's. Kit includes 16- 1.52 ratio Magnum Roller Tip rockers and High Energy Pushrod set.
COMP Cams Magnum Roller Rockers are the ultimate street rocker. That’s because they were designed with the serious performance enthusiast in mind. They will help your engine make more power and last longer. Magnum Roller Rocker Arms are:
Magnum Roller Rocker Arms are made from 8620 chromemoly steel. This makes them stronger than die-cast aluminum or stamped steel rockers. This superior material, along with the Magnum’s super stiff design, assures maximum lift because this rocker arm will not flex.
You can’t get maximum horsepower from your engine if your rocker ratio is off. Comp checked other rockers and found rockers that were as much as .040” short on lift. The Magnum Rockers are super accurate.They check dead on every time.
The Magnum Roller Rockers can make between 15 and 30 horsepower over other rockers! Why? The secret is that not only does the roller tip reduce friction, the Magnum Rocker’s incredibly stiff design and super accurate ratios yield more effective valve lift.
The roller tip design reduces friction by not scrubbing the valve end or pushing the valve stem hard against the valve guide. This in conjunction with the super strong design of the rocker makes for a simple, bulletproof, and cost effective combination.
Magnum Roller Rockers can be used with all High Energy, Magnum, Xtreme Energy, XFI, Nitrous HP, Xtreme 4X4 and Xtreme Marine Camshafts as well as any other hydraulic or solid cam where open spring pressures do not exceed 350 lbs.
|Maximum Spring Diameter (in)
||Kit includes pushrods.
||COMP Cams Magnum Rocker Arm Kits
||Sold as a kit.
|Rocker Arm Body Style
|Rocker Arm Finish
|Rocker Arm Material
|Rocker Arm Mounting Style
|Rocker Arm Nut Style
|Rocker Arm Ratio
|Rocker Arm Style
Other customers who purchased this product also purchased: