Engine Kits

Magnum Roller Tip Rocker Arm Kit for 1968 - 1989 Ford 289-302
Click On Image To Enlarge

Magnum Roller Tip Rocker Arm Kit for 1968 - 1989 Ford 289-302

Part #: RP1453-16
List Price: $402.58
Our Price: $182.99
You Save: $219.59

Availability: In Stock

Comp Cams Magnum Roller Tip Rocker Arm Kit for 1968 - 1989 Ford 289 - 302 Rail type w/ flat tappet cam. Kit includes 16 -1.7 Magnum Roller Tip rockers and High Energy pushrod set.

COMP Cams Magnum Roller Rockers are the ultimate street rocker. That’s because they were designed with the serious performance enthusiast in mind. They will help your engine make more power and last longer. Magnum Roller Rocker Arms are:

Magnum Roller Rocker Arms are made from 8620 chromemoly steel. This makes them stronger than die-cast aluminum or stamped steel rockers. This superior material, along with the Magnum’s super stiff design, assures maximum lift because this rocker arm will not flex.
You can’t get maximum horsepower from your engine if your rocker ratio is off. Comp checked other rockers and found rockers that were as much as .040” short on lift. The Magnum Rockers are super accurate.They check dead on every time.
The Magnum Roller Rockers can make between 15 and 30 horsepower over other rockers! Why? The secret is that not only does the roller tip reduce friction, the Magnum Rocker’s incredibly stiff design and super accurate ratios yield more effective valve lift.
The roller tip design reduces friction by not scrubbing the valve end or pushing the valve stem hard against the valve guide. This in conjunction with the super strong design of the rocker makes for a simple, bulletproof, and cost effective combination.

Magnum Roller Rockers can be used with all High Energy, Magnum, Xtreme Energy, XFI, Nitrous HP, Xtreme 4X4 and Xtreme Marine Camshafts as well as any other hydraulic or solid cam where open spring pressures do not exceed 350 lbs.

Brand COMP Cams
Notes Includes High Energy pushrods.
Part Type Rocker Arms
Product Line COMP Cams Magnum Rocker Arm Kits
Quantity Sold as a kit.
Rocker Arm Body Style Standard
Rocker Arm Finish Natural
Rocker Arm Material Chromemoly steel
Rocker Arm Mounting Style Stud
Rocker Arm Nut Style Self-locking
Rocker Arm Ratio 1.7
Rocker Arm Style Roller tip
Self-Aligning No
Shims Included No
Slot Style Standard
Stud Size 3/8 in.