Edelbrock Performer Cam Kits are Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts come with hydraulic lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.
Advertised Duration
270 int./280 exh.
Advertised Exhaust Duration
280
Advertised Intake Duration
270
Assembly Lubricant Included
Yes
Basic Operating RPM Range
Idle-5,500
Brand
Edelbrock
Cam Style
Hydraulic flat tappet
Camshaft Gear Attachment
1-bolt
Computer-Controlled Compatible
No
Duration at 050 inch Lift
204 int./214 exh.
Exhaust Duration at 050 inch Lift
214
Exhaust Valve Lash
0.000 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio
0.442 in.
Gaskets Included
No
Intake Duration at 050 inch Lift
204
Intake Valve Lash
0.000 in.
Intake Valve Lift with Factory Rocker Arm Ratio
0.420 in.
Lifter Style
Hydraulic flat tappet
Lifters Included
Yes
Lobe Separation (degrees)
112
Locks Included
No
Notes
Single-bolt camshaft.
Part Type
Camshaft and Lifter Kits
Product Line
Edelbrock Performer-Plus Cam and Lifter Kits
Pushrods Included
No
Quantity
Sold as a kit.
Retainers Included
No
Rocker Arms Included
No
Timing Chain and Gears Included
No
Valve Lift with Factory Rocker Arm Ratio
0.420 int./0.442 exh. lift
Valve Springs Included
No
Valve Stem Seal Set Included
No
Other customers who purchased this product also purchased: