Bore 4.700" or 119.38mm, Compressed Thickness .051", Performance Head Gasket with a Pre-Flattened Steel Wire. This gasket is a steel Core Laminate head gasket. Gasket bores are round 4.900" bore center with minimal brinelling of aluminum heads. Same bolt pattern as part number 1098.
This Fel-Pro Performance Head Gasket Part Number 1081, fits Standard Chevy Big Block and has a volume of 14.600cc and is Sold individually / Each
Performance engines often have higher compression ratios and special cam timing. They also operate at higher RPM. In addition, they may be supercharged, turbocharged or use nitrous oxide. These conditions will increase the cylinder pressure and stress on the cylinder head gasket.
In addition to high combustion pressures, performance engines often have a large amount of cylinder head movement. Racing and street performance engines develop much higher horsepower than their passenger car counterparts. For example, a Chevrolet 350 (5.7L) V8 racing engine can develop between 600-1000 horsepower, compared to 180-385 horsepower for passenger car and light truck applications.
On top of that, peak torque may occur at 5600 RPM for a typical racing engine compared to 3500 RPM for the same engine in a passenger car. These factors combined create a brutally tough environment for the head gasket. FEL-PRO Performance Head Gaskets incorporate special features to accommodate these conditions.
The key difference between regular FEL-PRO PermaTorque® head gaskets and FEL-PRO Performance PermaTorque® Head Gaskets is a wire ring combustion seal inserted inside the stainless steel armor of FEL-PRO Performance Head Gaskets. The wire ring design provides highly concentrated sealing around the combustion chamber.
The wire ring helps concentrate the sealing load around the combustion chamber. Because of the wire ring, the combustion seal is squeezed by the head and block with a force about three times as great as standard head gaskets with a conventional armor and no wire ring. In addition, these Performance Head Gaskets have armors of the highest quality stainless steel available, and can withstand combustion pressures ranging from 1500 to 3000 psi.
FEL-PRO Performance Head Gaskets use a rubber/fiber facing material reinforced with KEVLAR® fiber, laminated to a solid steel core to resist torque loss and seal fluids. Conformable anti-stick coatings are used on the gasket body to help seal minor surface irregularities.
Besides aiding in micro-sealing, anti-stick surface coatings make gasket removal and cleanup easier. This is a special advantage in performance applications, where engine changes and repairs require frequent disassembly.
Fel-Pro Performance Head Gaskets comes with Perma Torque Blue Stripe and pre-flattened wire rings in either steel or copper. price per each
Performance engines often have a higher compression ratios and special cam timing. They also operate at higher RPM. In addition, they may be supercharged, turbocharged, or use nitrous oxide. These conditions will increase the cylinder pressure and stress on the cylinder head gasket and a brutally tough environment for the head gasket. Fel-Pro Performance Head Gaskets are designed with features to help your engine accommodate these conditions.
PermaTorque® Performance Head Gaskets Fel-Pro's must popular gasket design do date.
Fel-Pro PermaTorque® head gaskets include a wire ring combustion seal inserted inside the stainless steel armor. The wire ring design provides highly concentrated sealing around the combustion chamber
Federal-Mogul's Fel-Pro® brand PermaTorque® performance head gaskets include a wire-ring combustion seal inserted inside the stainless steel armor.
This unique design ensures a highly concentrated seal around the combustion chamber.
The rubber/fiber facing material of the gasket is reinforced with KEVLAR® fiber, laminated to a solid steel core to resist torque loss and seal fluids.
PermaTorque performance head gaskets boast conformable antistick surface coatings to help seal minor surface irregularities and expedite gasket removal and cleanup.
Fel-Pro PermaTorqueMLS Multi-Layer Steel
The latest development in head gasket technology is the multi-layer steel (MLS) design. At first glance, these gaskets look like the old-style embossed steel shim gaskets, but they are radically different. A thin rubber coating is bonded to the stainless steel shim and, as required, multiple layers (up to five) of this rubber-coated steel shim are assembled into a single gasket. The high-temperature rubber coating provides excellent fluid sealability across the outer faces and between the individual layers, while also sealing minor head and block surface imperfections. MLS head gaskets provide the ultimate in torque retention and supply extra strength to support current lightweight aluminum casting designs. They are specified on most current domestic and imported engines in production.
Why is the Fel-Pro PermaTorqueMLS Design Better than the OEM Gaskets?
Traditional original equipment manufacturer (OEM) type MLS head gaskets don't easily conform to surface irregularities, and require an incredibly smooth surface finish to provide a satisfactory seal. When the castings are new and the finish is fresh, OEM-style MLS gaskets work quite well. But when the castings are old or resurfaced with a less than perfect finish, leaks result. To seal under these adverse conditions, Fel-Pro engineers have developed the exclusive PermaTorqueMLS design, engineered for the aftermarket repair environment. These newly redesigned MLS gaskets have many unique features that allow them to seal better than other MLS gaskets on the market today.
Compressed Thickness (in)
Compressed Volume (cc)
Steel core laminate
Fel-Pro Performance Head Gaskets
You might also be interested in the following items(s):