Hi-Voltage Fuel Injection Control Module Ford 2003 - 2009 FICM
Part #: 921-158P
List Price: $713.98
Our Price: $356.99
You Save: $356.99
Core Price: $200.01
Availability: In Stock
Free Ground Domestic Shipping To 48 Contigous States
2003 thru 2009 Ford Powerstroke 6.0L Excursion, Super Duty, and E Series
The Arctic PowerVolt 58 Volt FICM comes pre-programmed with the latest software (on-vehicle programing is not required). The latest version of software includes an inductive heating feature that rapidly heats the injector spool valve by activating the injector coils. This upgrade helps reduce injector stiction. This mode of operation is only activated when the PCM senses the engine is started under cold operating parameters.
The Arctic PowerVolt 58 Volt FICM comes ready for installation and operation. Each unit is fully tested at the factory and must pass a battery of tests which include fully loading the internal power supply, verification of communication between the FICM and PCM, verification of each injector activation, and waveform analysis of each injector’s coil. A complete self diagnostic and scan test is also performed.
Remanufacturing’s Arctic PowerVolt 58 Volt FICM (GB Part # 921-158P) is a remanufactured high performance FICM designed to improve cold weather engine operation, improve injector response time and reduce injector stiction; common problems associated with the 2003-09 Ford Powerstroke 6.0L engine. The APV FICM accomplishes this by increasing voltage to the injectors from 48 volts to 58 volts and modifies the peak current used to activate the fuel injectors. Unlike other competitive 58 volt FICMs, GB Remanufacturing’s Arctic PowerVolt 58 Volt FICM upgrades all of the components and drivers exposed to this higher voltage. In addition to these upgrades, GB corrects many of the original design and manufacturing flaws that are present in the original equipment FICMs. The result is a highly reliable unit that improves engine performance.
Fuel Injection Control Module (FICM) Programming
This remanufactured Fuel Injection Control Module (FICM) is pre-programmed with the latest software at the time of re-manufacture. The unit is ready for installation and operation. The latest version of software includes an inductive heating feature that will rapidly heat the injector spool valve by activating the injector coils. This will help reduce injector stiction. This mode of operation is only activated when the PCM senses the engine is started under cold operating parameters.
In some cases, pre-programming may result in Diagnostic Code U0306 being stored in the Powertrain Control Module (PCM).
This code will not cause the Malfunction Indicator Lamp (MIL) to illuminate or any adverse driveability symptoms. Code U0306 is the result of having a later version of software in the FICM module than the PCM expects. If desired, code U0306 may be corrected by reprogramming the FICM and PCM together, on the vehicle with the appropriate re-programming equipment and software.