Melling Cam and Break-In Lube 4 Ounces
Part #: M10012
List Price: $15.38
Our Price: $6.99
You Save: $8.39
Buy 2 for $6.29 each and save 10%
Buy 6 for $5.94 each and save 15%
Buy 12 for $5.24 each and save 25%
Melling Engine Assembly and Break-In Fluid 4 Ounces
Melling Mell-Lube engine assembly and break-in fluid contains a special additive that plates wear surfaces to prevent scoring or galling during engine startup.
Mell-Lube also contains corrosion inhibitors to prevent rust and pitting to new engines.
Not For Use On Cylinder Walls Or Piston Rings.
Insufficient lubrication is one of the most common causes of camshaft failure during the initial start-up. If the valve train components are not properly pre-lubricated, they can be damaged within the first few revolutions of the camshaft. Once the damage has occurred, no amount of lubrication will prevent the impending breakage of these parts. The use of a high quality break-in lube such as M10012 Melling as you reassemble the engine will help stop that damage.
Cam & Lifter Lube has an extreme pressure lubricant rating and excellent adhesion quality. It will help prevent scuffing and galling during the initial start-up caused by the high loads placed on lifters and components. The adhesion quality also will prevent the lubricant from draining off the components during engine assembly. Cam & Lifter Lube is functionally equivalent to all OEM pre-lubricants.
DO NOT use Motor oil as a prelube. Motor oil has a tendency to drain off from engine parts to rapidy. Plus the light Motor oil film that remains is insufficient to protect the camshaft or other components during the initial high pressure break-in period.
Other customers who purchased this product also purchased: