Powermaster 27294 High Amp Alternators
Part #: 27294
List Price: $294.00
Our Price: $147.00
You Save: $147.00
Polished Delco 100 amp 1 wire 100/70 - Highway Amps/Amps at Idle, This Powermaster Delco style alternator has a Show Chrome Finish and is a One or Three Wire/ OE Operation and includes a heavy duty diodes with over-sized bearings
Powermaster early style Delco alternators will work either way - as a one wire or OEM style. The main difference between a one wire and an OEM is the method used to energize or turn on the alternator. An alternator using the OEM style is turned on with the ignition switch. The one wire design is energized with a special sensing circuit built into the internal voltage regulator.
This circuit senses the rotation of the alternator’s rotor. The rotor must turn at sufficient speed to trip the circuit, starting the charging process. This turn-on speed is affected by several things and is typically higher with certain high amperage alternators. Once this circuit is tripped, the alternator will charge at all speeds, even very low ones, until the alternator’s rotor comes to a complete stop. At that point, the circuit will shut off and wait for the process to be repeated.
What this means for you is that in some applications the engine must be revved to 1200 or 1400 RPMs to turn the one wire alternator on. If the wiring harness is available and this characteristic is annoying, then Powermaster alternators can be plugged in like the stock unit and operated with the ignition switch.