Comp Cams Hi-Tech Pushrods

Hi-Tech The Ultimate One Piece Race Pushrods

COMP Cams­ Engineers have found that the pushrod is one of the most important members of the valve train, and certainly the most taken for granted. Prior to extensive research at COMP Cams­, it was thought the pushrod only had to be strong enough not to fail, bend, or burn up at the ends. Now Comp Cams engineers have learned that the frequency of the pushrod must match that of all the rest of the parts in the valve train, as well as the RPM at which the engine will be run.

Today’s all out unlimited race engines deserve the ultimate in quality at every step, and COMP Cams­’ High Tech Pushrods fill that requirement. The one piece design from seamless chromemoly tubing insures the ultimate in strength. The ends are precision formed, yielding added thickness in the critical tip area for strength, while maintaining constant wall thickness and concentricity. The pushrods are then heat treated to insure compatibility with guide plates and for maximum strength. They are OD round for consistency, and black oxide finished with a length and part number laser etched on the OD for ease of identification. These pushrods are all .080" wall thickness.

• One-piece construction from .080” wall seamless chromemoly
• Heat-treated for extended durability & guide plate compatibility
• Precision formed & reinforced 5/16” ball type ends
• Black oxide finished and laser etched part number & length
• Ideal for serious street performance and race applications

This product is in the following categories:

Manufacturer: