Rocker Arm Kits All rocker arm kits (RP-Kit) include quality COMP Cams® roller rocker arms and matching pushrods. Some applications also come with precision guide plates and rocker arm studs.
Magnum Pushrods™ are one-piece .080” wall chrome moly steel. These pushrods are an affordable alternative for engines needing a pushrod to stand up to higher spring pressures and the associated stresses of a high performance engine. All Magnum Pushrods™ are Heat Treated to be compatible with guide plates
Hi-Tech The Ultimate One Piece Race Pushrods, are a one piece design from seamless chromemoly tubing insures the ultimate in strength. The ends are precision formed, yielding added thickness in the critical tip area for strength, while maintaining constant wall thickness and concentricity. The pushrods are then heat treated to insure compatibility with guide plates and for maximum strength.
COMP Cams Magnum Roller Rockers are the ultimate street rocker. That’s because they were designed with the serious performance enthusiast in mind. They will help your engine make more power and last longer. Magnum Roller Rocker Arms are made from 8620 chromemoly steel. This makes them stronger than die cast aluminum or stamped steel rockers. This superior material, along with the Magnum’s super stiff design, assures maximum lift because this rocker arm will not flex
Note: Contents of kits may vary from application to application; components shown are typical examples.
Comp Cams High Energy Rocker Studs 3/8x24" Stud Diameter, Base Thread Size is 7/16x14 in.
Rocker Arm Nut Thread Length 0.857 in. Effective Stud Length 1.750 in. Base Thread Length 0.680 in.
