Engine Kits

Clevite 77 TriMetal Rod Bearings

Clevite 77 TriMetal Rod bearings

Clevite 77 TriMetal Rod bearings have been the industry standard since the first patent on the cast, copper, lead composition decades ago. The success and notoriety Clevite 77 has earned on the track proves the commitment to excellence maintained by all who contribute to the Clevite 77 brand. This track success provides Clevite 77 the ultimate proving ground for technologies that yield results in all passenger car and light vehicle applications.

Engineering quality engine bearings involves a number of interdependent factors. These points are just a few of the advantages Clevite 77 TriMetal Rod bearings:

It takes Three Layers to be Number One, and Clevite 77 TriMetal are it !

Seizure Resistance:
TriMetal bearings have significantly greater seizure resistance than bi-metal bearings, by as much as 40%.
Load Capacity:
TriMetal bearings can withstand much higher loads for longer periods of time as compared to bi-metal bearings, over 60% higher.
Embedability & Conformability:
The overlay on a TriMetal bearing offers a far more forgiving surface than bi-metal bearings. These features may not be as critical during OE assembly as they once were, but they do offer additional protection that can be extremely beneficial in an engine that is poorly maintained.
Clevite 77’s TriMetal bearings not only exceed light vehicle OE durability requirements of 150,000 miles, they also exceed heavy vehicle OE durability requirements of 300,000 miles.
Because the surface layer of a TriMetal bearing adds an additional manufacturing step, Clevite regularly hold wall sizes to within .0005” as compared to a bimetal that can be held to within .0003”. This stack up of tolerances has nothing to do with quality,  suitability, or service life.
Wear Resistance:
While the silicon in the bi-metal material does contribute to slightly improved wear resistance as compared to the Babbitt surface layer of a TriMetal material, it’s at the direct expense of embedability and conformability.

This product is in the following categories:

HomeEngine PartsRod Bearings



Part #: CB1214AL

Chrysler Clevite 77, Tri-Metal Connecting Rod Bearing fits the following: 225 cid / 3.7L H225, HA225, HB225, HC225 6-cylinder 1961-1987. 225 cid / 3.7L OHV 6-cylinder 1960-1987.
Price: $3.16

Part #: CB1223P

1488cc 1.5l ec (canadian) 4-cylinder 1975-1979
1488cc 1.5l ed1/ed2 4-cylinder 1975
1488cc 1.5l ed3/ed4 4-cylinder 1976-1979
1488cc 1.5l em1 sohc 4-cylinder 1980-1983
1599cc 1.6l ef1 sohc 4-cylinder 1976-1978
1599cc 1.6l eg (canadian) 4-cylinder 1978-1979
1602cc 1.6l el1 (canadian) 4-cylinder 1982-1983
1751cc 1.8l ek1 sohc 4-cylinder 1979-1983
Price: $6.30

Part #: CB1228P

Clevite Rod Bearings GM 1975-2004
Price: $7.91
Part #: CB1238P

Clevite Rod Bearings Gm, Isuzu, & Jeep 1980-20
Price: $4.22

Part #: CB663P

262 4.3L 75-76 267 V8 79-82 305 5.0L 76-94 327 68-69 LG Journal 350 5.7L 68-02 Gen I LT Gen II 92-97 400 SBC v8
Price: $4.05
Part #: CB743P

Big Block Chevy Tri-Metal Direct Replacement Rod Bearing-Priced Each
Price: $64.80