Dorman Window Lift Motor

Dorman Window Lift Motor are 100% NEW for the same price as a reman window lift motor . Using a New Dorman window lift motor kit means fewer comebacks because it has all new components not someone else's rebuilt headache.

New Dorman window lift motor kits  are suplied with an OE type connector so there is no wire cutting or splicing therefor you do the job right the first time with the parts necessary to do the job. New Dorman window lift motor kit matches OE fit and function

WINDOW REGULATORS

1. Follow the proper repair procedure for your vehicle as outlined in the shop manual to prevent damage and insure a trouble free installation.
2. Check operation of window regulator. Replace if binding, noisy or if operation is erratic
3. Replace all rod retaining clips
4. Remove original unit and compare the replacement unit to the original (some units are similar but mount different, etc)
5. Always torque fasteners to specs (do not over-tighten). See shop manual.
6. Always replace door panel retaining clips
7. Check the operation of the door lock actuators. Replace if binding, erratic or inoperative.
8. Inspect tape type window regulator for obvious damage to nylon tape. Replace the tape as necessary. (Hint: window will exhibit ratcheting type noise as tape skips)
9. Carefully align all components. Operate window and check for binding BEFORE installing door panel. Make adjustments as required. Refer to shop manual for specific installation instructions.
10. Do not damage water shield. It will need to be reused.
11. Inspect all door hinge pins and strikers. Hint: if door drops when opened, hinge bushings and pins may be worn out. See catalog for replacement parts.

Information provided is designed for professional installers. If you are unsure about terminology, procedures or other instructional references, please consult a professional installation repair facility

This product is in the following categories:

Manufacturer: