Ford 3.0L Ranger 1991 Hydraulic Cam

Ford 3.0L  Ranger 1991 Hydraulic Cam Engine kit, cam kit and re-ring kit

If you need a  Ford 3.0L  Ranger 1991 Hydraulic Cam engine kit, Take a look at this!!  The lowest price kits out there with brand name components.

Northern Auto Parts Kits come complete with top quality Name Brand parts from: Federal Mogul, Sealed Power, Mahle, Mr Gasket, Hastings, Melling, Pioneer, Perfect circle, Clevite, Victor Reinz, and Fel-Pro. You will not find a more complete, less expensive kit with the name brands we offer, out there anywhere, period !

Most kits have Option upgrades allow for substitutions at the cost indicated.
Oversizes available at no extra cost. I.E. pistons, rings and bearings sizes

Ford 3.0L  Ranger 1991 Hydraulic Cam
Master Kit Includes:

• Name Brand Stock style Camshaft
• Name Brand Stock style Lifters
• Name Brand Stock style Timing set / Belt
• Name Brand Stock style Pistons
• Name Brand Stock style Piston Rings
• Name Brand Stock style Rod Bearings
• Name Brand Stock style Main Bearings
• Name Brand Stock style Cam Bearings
• Name Brand Stock style Oil Pump
• Name Brand Stock style Frost Plugs
• Name Brand Stock style Gasket Set

Ford 3.0L  Ranger 1991 Hydraulic Cam
Cam Kit Includes:
Includes Camshaft, Lifters, and Timing Set

• Name Brand Stock style Camshaft
• Name Brand Stock style Lifters
• Name Brand Stock style Timing set / Belt 

Ford 3.0L  Ranger 1991 Hydraulic Cam
Re-Ring Kit Includes:
Includes Piston Rings, Rod and Main Bearings and Gasket Set

• Name Brand Stock style Piston Rings
• Name Brand Stock style Rod Bearings
• Name Brand Stock style Main Bearings
• Name Brand Stock style Gasket Set

Here are some Engine Rebuilding Tips

1. Need oversized pistons? make sure to match your rings to the piston, over-size.
2. Never soak your lifters, just coat with a good cam lube prior to installation
3. When replacing your camshaft with a higher lift cam always buy matching springs.
4. Remember to use Plastigage on your bearings to make sure of a proper oil clearance 
5. When installing any bearing Do not Attempt to Polish The Bearing Running
   Surface With Any Type Of Abrasive Pad Or Paper.
6. Use an Engine Break-in Oil Additive such as Comp Cam's #159

For more tips and information check out the great links- From Clevite
Camshaft Break-In Procedures  /  Camshaft Installation Tips  /  Crankshaft Installation Tips 
Checking Bearing Clearances  /  Engine Bearing Installation Tips   /  Oil Pump Installation

This product is in the following categories:

Manufacturer: