Crankshaft Supply Re-manufactured Stock Cranks. These Crankshaft Supply Isuzu Crankshafts are thermal cleaned, steel shot blasted, bolt holes and keyways inspected, centerline checked, straightened and magnafluxed. Necks, flanges and badly worn journals are restored, bearing journal surfaces machined, polished, oil holes chamfered, thoroughly cleaned, with filleted radius to maintain OE specs. Bearings are included with Crankshaft unless noted.

Core Return Policy - Cores returned for credit need to be sent at shippers expense in rebuild-able condition. Return cores "rust-free". We recommend you return it in the package sent to you. To insure prompt credit for your core, enclose a clear copy of your original invoice.

Crankshaft Supply has been repairing and machining Crankshafts, Rods, and more for over 50 years. Crankshaft Supply are the specialists in Crankshaft repair. . Crankshaft Supply is proud of their dedicated staff, and their dedication to your satisfaction

Crankshaft Supply Isuzu Crankshaft Kits Are:

Thermal Cleaned
Steel shot blasted
Bolt holes and keyways inspected
Worn journals are restored
bearing journal surfaces are machined, polished
Oil holes chamfered and deburred
Oil line passages clean and rust inhibitor applied
Crankshafts are packed and covered with two-mil poly film and encapsulated with sprayed foam
Main and Rod Bearings are included, unless noted

The poly film is a Rust inhibitor therefor you must wash the entire crank with soap and water at least 6 hours before you install it ( we recommend that you rinse your crank at least three times to remove all traces of soap)

This product is in the following categories:

Home > Crankshafts & Connecting Rods > Crankshafts

Manufacturer:

Crankshaft Supply

Reman Crank Kit 1989-1992 Trooper II, GM Engine 2827cc, 2.8L, V6

Part #: 18073

1989-1992 Trooper II, GM Engine 2827cc, 2.8L, V6, With Casting Number 481, 526

Reman Crank Kit 1988-2005 GM Engine, 3.1L 3.4L Check VIN

Part #: 18077

1988-2005 3.1L, V6, Vin J, M, T & V ..GM Engine fits Pickups,Venture, Isuzu, Engine Model CPC, With Casting Numbers 17, 268, 981, 1X-148071 1991-2005 GM Engine 3.4 L including VIN Codes E,S,and X With casting With Casting Numbers 17, 268, 981, 1X-148071 Crankshaft has a reluctor ring with notches for use in a distributorless engine

Reman Crank Kit 1996-1997 Hombre, GM Engine 2195cc, 2.2L

Part #: 18079

1996-1997 Hombre, GM Engine 2195cc, 2.2L, Engine Model LN2. Parting edge of crankshaft is approximately 1/2" away from notch on the reluctor ring. This part number will not interchage with 12970. Casting Number 1237, L3, 4618

Reman Crank Kit 1998-2000 Hombre, GM Engine 2195cc, 2.2L

Part #: 18093

1998-2000 Hombre, GM Engine 2195cc, 2.2L, Engine Model LN2. Parting edge of Crankshaft lines up next to notch on the reluctor ring. This part will not interchange with 12740. Casting Number 1237, L3, 4618

Reman Crank Kit 1996-1997 Oasis, F22 Honda Engine 2156cc, 2.1L

Part #: 80019

1996-1997 Oasis, F22 Honda Engine 2156cc, 2.1L, Engine Model RJ1, With 16mm Snout Bolt

Reman Crank Kit 1998-2003 DOHC Engine, Deawoo 2198cc, 2.2L

Part #: 92022

1998-2003 DOHC Engine, Deawoo 2198cc, 2.2L, Engine Model X22SE, With Casting Number 2671, 608, 90530454, 9324286

Reman Crank Kit 1987-1989 I-Mark turbo 1471cc, 1.5L

Part #: 92023

1987-1989 I-Mark turbo 1471cc, 1.5L, Engine Model 4XC1, 4XC1T. Flywheel Flange has 6-Bolt holes. (See also 12550). With Casting Number 73, KN, KN7, KN10

Reman Crank Kit 1989 I-Mark 1.6L, 1588cc, Engine Model 4XE1W

Part #: 92023

1989 I-Mark 1.6L, 1588cc, Engine Model 4XE1W, with Main Journal Diameter 1.887", With Casting Number 73, KN, KN7, KN10

Reman Crank Kit 1985-1989 1471cc, 1.5L, Engine Model 4XC1, 4XC1T

Part #: 92024

1985-1989 1471cc, 1.5L, Engine Model 4XC1, 4XC1T, Flywheel Flange has 6-Bolt Holes. (See Also 12670) Casting Number 4127, 5330, KN7, KN10

Reman Crank Kit 1990-1993 Stylus, Impulse, Impulse Turbo 1.6L

Part #: 92025

1990-1993 Stylus, Impulse, Impulse Turbo 1588cc, 1.6L, Engine Model 4XE1, 4XE1W, Main Journal Diameter is 2.044", With Casting Number KN2, KN5, KN7

Reman Crank Kit 1986-1995 2254cc, 2.3L, Engine Model 4ZD1

Part #: 92026

1986-1995 Pickup, 1986-1987 Trooper II, 1989-1993 Amigo, 1988-1989 Impulse 2254cc, 2.3L, Engine Model 4ZD1, With Casting Number AB

Reman Crank Kit 1988-1994 Isuzu Pickup, Trooper II, Rodeo, Amigo

Part #: 92027

1988-1994 Isuzu Pickup, Trooper II, Rodeo, Amigo 2559cc, 2.6L, Engine Model 4ZE1

Reman Crank Kit 1981-1985 I-Mark, Pickup 1817cc, 1.8L

Part #: 92028

1981-1985 I-Mark, Pickup 1817cc, 1.8L, Engine Model G180Z

Reman Crank Kit 1983-1987 Trooper II, Impulse, Pickup 1949cc, 1.9L

Part #: 92028

1983-1987 Trooper II, Impulse, Pickup 1949cc, 1.9L, Engine Model G200, G200Z

Reman Crank Kit 1995-1997 Pickup, Trooper II, Amigo, Rodeo 2.6L

Part #: 92029

1995-1997 Pickup, Trooper II, Amigo, Rodeo 2559cc, 2.6L, Engine Model 4ZE1. Crankshaft has a bolt-on sensor ring at the rear main journal.

Reman Crank Kit 1992-1995 Trooper, Rodeo 3165cc, 3.2L, V6

Part #: 92030

1992-1995 Trooper, Rodeo 3165cc, 3.2L, V6, Engine Model 6VD1, With 7-notch wheel

Reman Crank Kit 1996-1997 Trooper, Rodeo 3165cc, 3.2L

Part #: 92031

1996-1997 Trooper, Rodeo 3165cc, 3.2L, Engine Model 6VD1.

Reman Crank Kit 1998-2002 Amigo, Rodeo 3165cc, 3.2L, V6

Part #: 92031

1998-2002 Amigo, Rodeo 3165cc, 3.2L, V6, Engine Model 6VD1W

Reman Crank Kit 1998-2002 Trooper - DOHC - 3494cc, V6, Vin Code X

Part #: 92032

1998-2002 Trooper - DOHC - 3494cc, V6, Vin Code X, Engine Code 6VE1.

Reman Crank Kit 1985-1989 Impulse Turbo 1994cc, 2.0L

Part #: 92034

1985-1989 Impulse Turbo 1994cc, 2.0L, Engine Model 4CZ1