Ford Racing Blocks, Boss, Hemi and Wedge
Fel Pro Performance Gasket is a premium sealing system and the industry’s leading brand of replacement sealing products for Race vehicles, and heavy-duty applications. This Fel Pro Gasket specialty line is for performance, sport and marine engines.
Fel Pro Performance Gasket engineers are continually pushing ahead with new sealing science, developing problem-solving products like PermaDry Plus® rigid carrier gaskets.
The Fel Pro Performance Gaskets are the leader in multi-layer steel (MLS) head gasket design, the current leading-edge technology in sealing today’s lightweight engine castings with a long-term, leak proof seal called Perma Torque MLS®.
Because Fel Pro OEM is a global producer of engine and sealing products, Fel Pro Performance Gasket can benefit from Fel Pro’s proven expertise in engineering and manufacturing OE components and subsystems for the world’s major automotive manufacturers. Fel Pro OEM extensive field experience gives Fel Pro Performance, insights into the expected changes in engine components over time. Fel Pro Performance designs there aftermarket sealing parts to meet your specific needs in the Performance environment.
|Fel-Pro® Performance Head Gasket line is the engine repair solution for high-performance engines. Fel-Pro® brand performance head gasket are specifically designed to handle higher compression ratios, special cam timing and higher operating temperatures. In addition, Fel-Pro® brand performance head gasket are ideal for engines that are supercharged, turbocharged or use nitrous oxide.
The Fel-Pro performance head gasket line includes:
In the brutally tough environment that typifies a performance engine, Fel-Pro performance head gaskets deliver superior sealing performance.
- PermaTorque® wire-ring design
- Loc Wire®
Fel-Pro performance exhaust header gaskets, the performance version of an exhaust manifold gasket, resist blowout and burnout and provide good exhaust flow.
Fel-Pro performance exhaust header gaskets consist of a high-density fiber facing material attached to both sides of a perforated steel core. This design provides a durable gasket that will seal slightly warped surfaces.
Also, we use an anti-stick coating that allows the gasket to move without sustaining damage and helps the gasket accommodate the expansion and contraction of the head and headers.
Fel-Pro designs the exhaust header gaskets with “slotted” bolt holes so you can easily slip the gasket in place and then tighten the bolts. The high-density fiber retains the torque to ensure the gaskets seal
|Fel-Pro performance intake manifold gaskets must prevent air, oil and dirt from being sucked into the intake ports and prevent coolant from leaking out of the coolant ports. For performance engines, this is complicated by the variety of aftermarket cylinder heads and intake manifolds in use.
Fel-Pro performance intake manifold gaskets have been tested for use with most all aftermarket cylinder head and intake manifold combinations. In addition, most Fel-Pro performance intake manifold gaskets do not have a metal core, which allows engine builders to trim the gasket to ensure an exact fit on modified ports.
Fel-Pro offers a solid-core intake manifold gasket for high-vacuum race engines, as well as performance applications that have a long expected service life — i.e., street machines, marine use or tow vehicles. The solid core provides extra strength and stability, and the gaskets come in proven port shapes used in race intake gaskets.
Fel-Pro Performance Valve Cover Gaskets
Fel-Pro engineers have developed a complete line of performance valve cover gaskets using a variety of technologies and materials to ensure a proper seal in performance applications.
The available options make it easy to find the ideal gasket to meet specific requirements for application suitability, features and cost.
Fel-Pro Rigid-Core Molded-Rubber Valve Cover Gaskets
Fel-Pro Composite-Material Valve Cover Gaskets
Fel-Pro Cork-Lam Valve Cover Gaskets
Fel-Pro Rubber-Coated Fiber Valve Cover Gaskets
Fel-Pro Blue Stripe Cork-Rubber Valve Cover Gaskets
Fel-CoPrene Synthetic-Rubber Valve Cover Gaskets
|Fel-Pro performance rear main seals handle the unique needs of the professional racing engine builder. Fel-Pro offers special materials and design configurations optimized to perform under high crankcase vacuum conditions, elevated temperatures and high RPM levels. Racers depend on these seals for leak-free performance both on the track and on the street.
Seals are made of high-grade synthetic rubber materials, such as polyacrylate, silicone, Viton® and polytetrafluoroethylene (PTFE), so you can choose the best high-heat and abrasion-resistant sealing characteristics for your application.
|Fel-Pro Performance R.A.C.E. Gaskets: R.A.C.E.(Remainder to Assemble Complete Engine). These sets include the gaskets that, used in conjunction with oil pan gasket sets, complete lower engine service.
Each set includes the rear main bearing seals, timing cover gaskets and seals, and water and fuel-pump gaskets needed to complete the repair job.
Fel-Pro offers a wide range of R.A.C.E. gasket sets that will fit most popular performance engines.
Fel-Pro Performance Oil Pan Gaskets:
Fel-Pro offers three varieties of performance oil pan gaskets, each designed to meet the tough demands required to rebuild or repair high-performance engines.
Select a design for details about features and benefits.
Fel-Pro Rigid-Core Oil Pan Gaskets
Fel-Pro Enhanced Felcoid/Plus Oil Pan Gaskets
Fel-Pro Felcoid/Plus Oil Pan Gaskets
This product is in the following categories:
Gaskets and Sealing Solutions
Ford Racing Blocks Performance Gaskets
Fel-Pro Performance Gaskets
Part #: 1092
Bore 4.700" or 119.380mm, Compressed Thickness .051", Performance Head Gasket with a Pre-Flattened Steel Wire. This gasket is a steel Core Laminate head gasket. It has Minimal br...
Part #: 1099
Bore 4.660" or 118.364mm, Compressed Thickness .051", Performance Head Gasket with a Pre-Flattened Steel Wire. This gasket is a steel Core Laminate head gasket. It has Minimal br...
Part #: 1290
Intake manifold gasket set. that has a thickness of .060" or 1/16" . this is a composite gasket with coating. it has no ports or bolt holes.
This fel-pro part number 1290 performance inta...
Part #: 1443
Exhaust Header Gasket Set, 2.35" diameter Port Size, perforated steel core with an anti-stick coating with a round port shape head
This Fel-Pro part Number 1443 Performance Exhaust Header...
Part #: 1493
Exhaust Header Gasket Set, 1.50" x 2.20" Port Size, perforated steel core with an anti-stick coating, with rectangle port shape heads.
Fel-Pro part Number 1493 Performance Exhaust Header G...
Part #: 1643
Valve Cover Gasket Set, That has a thickness of .313" or 5/16". This is a Cork-Lam Performance Valve Cover Gasket Set, that has a Cork-Rubber blend with a steel core. Upper bolt spacing is...
Part #: 1659
Valve Cover Gasket Set, That has a thickness of .094" or 3/32". This is a Composite material Performance Valve Cover Gasket Set with a steel core and silicone coating. Upper bolt spacing is...
Part #: 1699
Valve Cover Gasket Set, That has a thickness of .094" or 3/32". This Performance Valve Cover Gasket Set is a Composite material with a steel core and has silicone coating
Part #: 1899
Oil Pan Gasket Set, That has a thickness of .094" or 3/32". This is a Rubber Coated Fiber Performance Oil Pan Gasket Set with a steel core.
This Fel-Pro part Number 1899 Oil Pan&...
Part #: 2712
R.A.C.E. (Remainder to Assemble Complete Engine) Sets.This Fel-Pro Part Number 2712 R.A.C.E. fits Wedge only....