BRM individual Lifter Bore brushes. You can't have a clean engine with just a hot tank and an air hose with water. You need something to take out the old metal chips, the grinding compounds the sludge and the dirt from the parts you can't see - the oil passageways.
BRM uses the finest quality high-density 6-12 Nylon in there Nylon Brushes, some cases call for a liter nylon fill, these cases are noted. Use the carbon steel wire brushes for the really rough spots
BRM Part Number 9 is our most popular selling lifter bore brush. Use this brush on .842 (GM), .874 (Ford) and .904 (Chrysler) V8 and V6 engines this is a 1-1/8" Nylon Lifter Bore Brush perfect for bores up to 1.125' the brush is 14" long.
Lifter Guide For Our Top Movers
AT872
.874
Ford older 2.8L 2.4L 352 390 406 427
AT992
.842
Chevy SB, BB V6, L6
HT817
.842
GM SB, BB V6, L6
HT855
.997
International 155 196 266 304 345 392
HT896
.842
Buick 225 300 322 340 350 364 401 425 430 / JEEP
HT951
.842
Buick OLDS, PONT V8
HT900
.874
Ford, SB, 429 , 460
HT969
.842
Buick 151 134 181 231 265 301 350 400 430 455
HT976
.904
Chrysler BB
HT2011
.904
Chrysler SB, BB AMC v8
HT2012
.842
Ford 2.0L 2.3L 2.5L Mazda 2.3L B2300
HT2083
.874
Ford, 390, 427, 428
HT2095
.922
GM V6 2.8L 3.1L 3.4L
HT2104
.922
GM Diesel 5.7L 6.2L 6.5L Roller
HT2105
.626
Chrysler 2.2L 2.5L
HT2148
.842
Chevy SB, BB V6, L6 Hydraulic Roller
HT2205
.874
Ford, 3.0L 3.9L 4.2L 5.0L 5.8L Hydraulic Roller
HT2269
.904
Chrysler 3.3L 3.8L 3.9L 5.2L 5.9L Roller
HT2270
.842
GM 2.2L 3.1L 3.4L 3.5L 3.9L Roller
HT2271
.629
Ford 2.5L 3.0L 4.0L 4.6L 5.4L 6.8L Chrysler / Mits / JEEP 3.7L 4.7L
1/2" .500" Nylon Lifter Bore Brush perfect for bores up to .500 Nylon brush that is 34" long Also used For Main oil Galleries because of the extra long handle
1.250" Lifter bore and Piston pin hole cleaner up to 1-1/4" tapered Nylon Brush that is 12" long. Some call this a Tapered Pin Fitter. BRM uses the finest quality high-density 6-12 Nylon in there Nylon Brushes, some cases call for a lighter nylon fill, these cases are noted
1-1/8" 1.125" Nylon Lifter Bore Brush perfect for bores up to 1.125' the brush is 14" long. This is our most popular selling lifter bore brush. Use this brush .842 (GM), .875 (Ford) and .904 (chrysler) V8 and V6 engines
