Lisle Specialty Engine Tools
Part #: 12100
Removes and Installs Oxygen Sensors on Most Domestic and Some Imports
Part #: 13250
Fits 1 1/16" Switches Up to 2 5/8" Long, Found on Newer GM and Chrysler Vehicles
Part #: 15000
Stones are available in five grits. use with heavy-duty 1/2" drill. Standard range 3" to 4 1/4". Big range (2 3/4" - 10 1/4") with additional rack sets and stone sets
Part #: 16000
Small Cylinder Hone For 1 3/4" to 2 3/4" (44.5 -66.9mm) Cylinders
Part #: 16750
Makes compressing the spring and removing the keepers a simple job because there is no need to remove the head
Part #: 19500
The Lisle spring clutch assures a proper fit on the piston and a positive locking action. Range 2 1/8" to 5". Height 3 1/2"
Part #: 20300
Easy reading gauge assures accurate vacuum and pressure check.
Part #: 21100
Thick handles for easy lapping. 21100 has 1 1/8" and 1 3/8" diameter cups for larger valves
Part #: 21200
Thick handles for easy lapping. 21200 has 5/8" and 13/16" diameter cups for smaller valves.
Part #: 23300
For Springs 3/4" to 1 1/16" - For Briggs and Stratton, Clinton, Harley-Davidson, etc.
Part #: 23500
Stone-Type Glaze Breaker - Full 2" to 7" Range (50.8 - 177.8mm)
Part #: 23520
220 grit For use with part number 23500 Stone Type Glaze Breaker
Part #: 23530
240 grit. For use after re-boring only. Not for glaze breaking. For use with part number 23500
Part #: 23540
320 grit. Suitable for use when installing moly rings. For use with part number 23500.
Part #: 24000
Comes with Two Easy-To-Set Cutter Wheels for Quick Cleaning of Grooves
Part #: 24020
Standard cutter blade for part number 24000
Part #: 27000
Removes and Installs Upper Rear Main Seals Without Dropping Crankshaft
Part #: 27800
Adjustable Probes fit all Electronic Fuel Injection Systems
Part #: 33500
Tapered jaws to remove and install most passenger car and light truck rings from 3/64" to 1/4" (1.2 - 6.3mm)
Part #: 36500
Rollers assure easy turning in cylinder. Exclusive stabilizer spring allows operator to take selective cut to minimize chatter
Part #: 36880
Locks Camshafts Sprockets in place during Belt/Chain Replacement
Part #: 43380
32MM Driving Wrench for 43300 Pneumatic Fan Clutch Wrench Set. Accessory for the lisle 43300 Fan Clutch Wrench Set. this 32MM driving wrench fit BMW, Audi and VW Passat.
Part #: 44300
Exceptionally strong, rigid frame, weighs only 6 lbs. Works with nearly all valve-in head and L-head engines as well as truck and tractor engines
Part #: 52500
Quickly pinpoints the source of noises in engines, transmissions, differentials and bearings.
Part #: 55700
Set checks fuel pressure on most Port Fuel Injection (PFI) and Throttle Body Injection (TBI) systems. Comes with a variety of adapters and gauges for checking many types of systems. Adapts to work with test port connections, end of hose connections and in-line connections. Tests GM, Ford, Chrysler, Honda/Acura, Toyota, Bosch CIS and L-Jetronic. List of component parts included with instructions. |