Lisle specialty automotive tools, mechanic’s creepers, and Brake Tools are the preferred line among automotive warehouse distributors and jobbers because Lisle manufactures quality products that are priced right.

Lisle Corporation celebrated the company’s founding and 100 years of continuous manufacturing in Clarinda, Iowa in 2003. The privately owned company is led today by third, fourth and fifth generation family members

You can search or browse the tools by clicking on the links below, Click on the picture to Learn more,

Shop Lisle Tools

Brake Cylinder Hone 3-Stone fits Cylinders 27/32" to 2"	Clutch Coupling Remover for Ford	Disconnect Tools for A/C & Fuel Lines	Small Master Chuck Key with 4 sizes	Large Master Chuck Key with 4 sizes
Radio Remover Disengages Retaining Clips on Fords	MAGNETIC DRAIN PLUG	Electrical Connector Separator	1" WIRE END BRUSH	1" Crimped Wire End Brush
Scratch Brush Overall length is 14"	Flat Band Hose Clamp Pliers w/Adj. Jaws	18 Gallon Oil Lift Drain Quick Release Height Adjustment	Door Handle and Window Crank Clip remover /installer	heat resistant Kevlar® Sleeve
Truck & Trailer Wheel Pan catches oil	Inline Spark Tester	Radiator Cap Pliers	MAGNETIC TOOL HOLDER	Truck Pedal Depressor
Spill-Free Funnel	Flywheel Turner	Metric Hex Bit Set Seven Piece	Tamper-Resistant Torx Bit Set	Master Tamper-Resistant Torx Bit Set
Strap Wrench	Truck Anchor Pin Bushing Driver	3/8" Hand Impact Tool	Automatic Center Punch	Magnetic pick-retrieves up to2.5lb parts
Scribe with straight and 90° points	"O" Ring and Seal Pick	Single and Double SAE Flares tool set	Telescoping Mirror	Flexible Flashlight Shines
Steering Wheel Lock Plate Tool	Trim Panel Remover	Plastic Fastener Remover	Door Panel Remover	LED Flexible Flashlight
Universal Hose Clamp Remover Flexible	Hose Pincher clamps	Serpentine Belt Tool	A/C-Fuel Line Disconnect Tool Set	Pulley Puller/Installer
Front Hub & Knuckle Separator	Twenty-six1/4" socket holder	Twenty-six1/4" socket holder	Twenty-eight 3/8" socket holder	Twenty-eight 3/8" socket holder
Sixteen3/8" socket holder	Twenty-two1/2" socket holder	Twenty-two1/2" socket holder	Fan Clutch Wrench Set for Ford	Lock Ring Pliers
Universal Steering Wheel Puller	Harmonic Balancer Puller For GM V6	Harmonic Balancer Puller	Hood Prop Works on All Makes of Cars and Trucks	Combination internal and external snap ring pliers
Windshield Locking Strip Tool	Hose Remover Pliers	Throttle Pedal depressor	Truck Brake Cage Bolt Socket	12 Point Bit Set Triple Square for head bolts, retaining bolts, disc brake calipers
	Mini Tubing Cutter	Side Winder Air Hose Reel	Oil Filter Pliers Slip Joint	Truck Oil Filter Pliers Slip-Joint

This product is in the following categories:

Home > Tools > All Lisle Specialty Tools

Manufacturer:

Lisle

Clutch Coupling Remover for Ford

Part #: 11750

Clutch Coupling Remover for Ford, Disconnects Ford Hydraulic Clutch Lines

Radio Remover

Part #: 11770

Radio Remover Disengages Retaining Clips on Fords & Imports.

Small Master Chuck Key

Part #: 12050

Small Master Chuck Key Has 4 sizes

Large Master Chuck Key

Part #: 12060

Large Master Chuck Key Has 4 sizes.

Electrical Connector Separator

Part #: 13120

Quickly Disconnects Electrical Connectors Without Damage

1" Wire End Brush

Part #: 14040

1" Wire End Brush For Light to Heavy Duty Work When Space is Limited

1" Crimped Wire End Brush

Part #: 14060

1" Crimped Wire End Brush For Light to Heavy Duty Work When Space is Limited

Scratch Brush

Part #: 14160

Removes rust, scale, paint and solder from metal surfaces.

Flat Band Hose Clamp Pliers

Part #: 17100

Adjustable Jaws Fit All Clamp Sizes for Easy Removal and Installation.

18 Gallon Oil Lift Drain

Part #: 17432

Quick Release Height Adjustment. Translucent jug holds 18 gallons and will not warp with hot oil.

Window and Door Clip Remover / Installer

Part #: 18600

Removes and Installs Door Handle and Window Crank Clips.

Hot Sleeve

Part #: 18700

Protects Arms from Burns While Working Around the Engine.

Truck & Trailer Wheel Pan

Part #: 19852

Catches Oil from Wheel Hubs After Removing Cap.

Inline Spark Tester

Part #: 20610

Inline Spark Tester

Gives a Visual Check of the Ignition System.

Quickly diagnose problems with all ignition systems. Connect the tool between...

Lisle 20680 Replacement Bulb

Part #: 20680

Replacement bulb for part number 20610 Inline Spark Tester

24" Magnetic Tool Holder

Part #: 21400

Powerful magnet holds even heavy hand tools.

Truck Pedal Depressor

Part #: 21520

Depresses and Holds Clutch Pedals and Brake Pedals.

Hose Pincher

Part #: 23000

Clamps And Holds Hoses Up To 3/4" I.D.

Flywheel Turner

Part #: 23800

Hold or Turn Flywheels and Flexplates on Most Vehicles.

Tamper Resistant Torx® Bit Set

Part #: 26000

Seven 1/4" Hex Insert Bits with 1/4" Drive Bit Holder. T-10 Through T-40.

1/4" Hex Insert Bits: T-15

Part #: 26020

Fits Torx size T-15

1/4" Hex Insert Bits: T-20

Part #: 26030

Fits Torx size T-20

1/4" Hex Insert Bits: T-25

Part #: 26040

Fits Torx size T-25

1/4" Hex Insert Bits: T-27

Part #: 26050

Fits Torx size T-27

1/4" Hex Insert Bits: T-30

Part #: 26060

Fits Torx size T-30

1/4" Hex Insert Bits: T-40

Part #: 26070

Fits Torx size T-40

Torx Bit: T-47

Part #: 26500

Torx size T-47 3/8" drive

Torx Bit: T-60

Part #: 26520

Torx size T-60 1/2" drive

Master Tamper Resistant Torx® Bit Set

Part #: 26530

Now Including T-45, T-50 & T-55 Sizes

Strap Wrench

Part #: 28500

Loosen or Tighten Cylindrical or Rectangular Objects.

Lisle 3/8" Hand Impact Tool Set

Part #: 29200

Loosens Rusted, Frozen Nuts, Bolts and Screws.

#4 Phillips 5/16" Insert Bit

Part #: 30190

#4 Phillips 5/16" Insert Bit Drive bits are impact quality

1/2 Hand Impact Tool

Part #: 30200

1/2 Hand Impact Tools Loosens Rusted, Frozen Nuts, bolts and Screws

Automatic Center Punch

Part #: 30280

Automatic Center Punch uses automatic firing action

Replacement Tip for Automatic Center Punch

Part #: 30290

Replacement Tip for Automatic Center Punch Part#: 30280

Magnetic Pick-up Tool

Part #: 31000

Extends from 14 1/2" to 23 1/4".

3/8" Adapter for Double Flaring Tool Set

Part #: 31180

3/8" Adapter for Double Flaring Tool Set Part#: 31310

Double Flaring Tool Set

Part #: 31310

The set includes 5 thread dies and adapters for forming double flares on the following tubing sizes: 3/16", 1/4", 5/16", 3/8" and 1/2"

3/16" Adapter for Double Flaring Tool Set

Part #: 31370

3/16" Adapter for Double Flaring Tool Set

1/4" Adapter for Double Flaring Tool Set

Part #: 31380

1/4" Adapter for Double Flaring Tool Set Part#: 31310

5/16" Adapter for Double Flaring Tool Set

Part #: 31390

5/16" Adapter for Double Flaring Tool Set Part#: 31310

1/2" Adapter for Double Flaring Tool Set

Part #: 31410

1/2" Adapter for Double Flaring Tool Set Part#: 31310

Scribe

Part #: 31800

Ideal for Marking Most Metal and Softer Material Surfaces, Comes with straight and 90° points to mark in even the tightest places

"O" Ring and Seal Pick

Part #: 31840

Quickly Removes and Installs "O" Rings and Seals

Telescoping Mirror

Part #: 32050

2 1/4" diameter mirror swivels to any position. Length extends from 10" to 14". Has an insulated vinyl grip.

Flexible Flashlight

Part #: 32250

Flexible wire holds the shape you give it. Focused high intensity bulb (only 1/4" in diameter) fits into the tight spots. Handle is 8 1/4" and the wire is 6 1/4" long.

Wire and Bulb Assembly for Flexible Flashlight

Part #: 32310

Wire and Bulb Assembly for Flexible Flashlight Part# 32250

Metric Hex Bit Set

Part #: 33850

Seven Piece Set. 3/8" Square Drive.

4MM Hex Bit For Metric Hex Bit Set

Part #: 33870

4MM hex bit for Metric Hex Bit Set Part# 33850Priced Individually. Set Not Included.

Plastic Fastener Remover

Part #: 35260

Removes Plastic Hold-Down Fasteners

Door Panel Remover

Part #: 35350

Removes Door Panel Fasteners, Even In Tight Spaces.

LED Flexible Flashlight

Part #: 35900

LED Bulb Lasts For Up to 100,000 Hours.

Replacement Bulb Assembly

Part #: 35910

Replacement Bulb Assembly for LED Flexible Flashlight Part# 35900

A/C-Fuel Line Disconnect Tool Set

Part #: 37000

Set includes six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".

Pulley Puller/Installer Adapter: Short 3/8" x 16

Part #: 38910

Short 3/8" x 16 Installer Adapter for Pulley Puller/Installer Part# 38850

Front Hub & Knuckle Separator

Part #: 39300

Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge and GM pickups, Cadillac, Jeep and Other Applications

Master Disconnect Set

Part #: 39900

Contains 8 Popular Disconnect Tools for A/C & Fuel Lines

Offset Jaws: 7/8" to 2 1/4"

Part #: 44770

Set of Medium Offset Jaws. 7/8" to 2 1/4" (22.2 - 57.1mm) capacity.

Universal Lift Support Clamp

Part #: 44870

Holds Weak Gas Charged Lift Supports Open

Lock Ring Pliers

Part #: 44900

For Removing and Installing All Types of Lock Rings

Steering Wheel Puller

Part #: 45000

Universal Puller for Most Makes and Models

Harmonic Balancer Puller For GM

Part #: 45300

For GM 3300 And 3800 V6 Cylinder Engines

Harmonic Balancer Puller

Part #: 45500

Helps Stop Damage to Pulley and Shaft

Hood Prop

Part #: 45900

Works on All Makes of Cars and Trucks, The tool telescopes from 18 1/2" to 46 3/4"

Combination Internal / External Snap Ring Pliers

Part #: 46000

Compresses internal rings in one position

Windshield Locking Strip Tool

Part #: 47000

Two Double-Ended Tips to Fit Most All Applications

Hose Remover Pliers

Part #: 47900

Hose Remover Pliers For Easy Removal of 5/32" to 1/2" Vacuum and Fuel Hoses

Aluminum Vise Jaw Pads

Part #: 48000

Aluminum Vise Jaw Pads Ideal for Holding Round and Hex Parts Securely

Rubber Faced Vise Jaw Pads

Part #: 48100

Rubber Faced Vise Jaw Pads For Protecting Delicate Parts

Throttle Pedal Depressor

Part #: 48700

Throttle Pedal depressor Holds throttle at a constant RPM

Truck Brake Cage Bolt Socket

Part #: 49000

Truck Brake Cage Bolt Socket Quickly Unlocks Truck Air Brakes

Mini Tubing Cutter

Part #: 50000

Mini Tubing Cutter All nylon construction

Side Winder Air Hose Reel

Part #: 50350

Coil and Uncoil Your Air Hose Neatly and Quickly to Prevent Damage The Side Winder Air Hose Reel provides a large 10" diameter reel to prevent tight coils in your air hose

Oil Filter Pliers

Part #: 50750

Slip Joint Handle for Greater Range

Truck and Tractor Oil Filter Pliers

Part #: 50950

Slip-Joint Handle Offers a 3 5/8" to 6" Range

Heavy Duty Scraper

Part #: 51000

Sharp Steel Blade Quickly Peels Off Carbon, Sludge

Replacemanet Blades for Heavy Duty Scaper #51000

Part #: 51120

Six 1" Replacemanet Blades for Heavy Duty Scaper #51000

1 1/4" Putty Knife

Part #: 51350

Ideal for scraping old putty, paint, dirt and carbon. Can also be used for applying putty

Spark Plug Wire Puller

Part #: 51600

Spark Plug Wire Puller also pulls cartridge fuses

Razor Blade Scraper

Part #: 52000

Comes with five stainless steel blades for removing stickers from windshields, bumpers, etc

100 Pack of Razor Blades

Part #: 52150

100 Pack of Razor Blades Convenient Pack of Standard Razor Blade

Fold-Up Scraper 34 Piece Set

Part #: 52400

Organizes all your torx bits, tamper resistant torx bits and torx sockets in a low profile storage case with window.

Clutch Pilot Bushing Remover

Part #: 55600

Fits brass or bronze bushings from 1/2" to 3/4" I.D. Not for use on steel bearings

Steering Wheel Lock Plate Tool

Part #: 57340

Tool depresses lock plate for easy removal of lock ring

Battery Carrier

Part #: 57850

Lift and Carry Batteries Safely

12 Point Bit Set

Part #: 60750

Triple Square (12 point) bits to fit 6, 8,10 and 12mm sizes; all on 1/2" hex drives

Heater Hose Coupler Remover

Part #: 62200

Removes broken heater hose couplers

Right Angle Ratcheting Screwdriver

Part #: 64250

Use where a screwdriver won't fit. Makes it easy to remove and install molding around fender wells and other tight places

Ignition Module Wrench For Ford

Part #: 64650

For 7/32" hex retaining bolts on Ford Ignition Module. May be used with 1/2" wrench

Windshield Wiper Arm Remover

Part #: 65750

Easily removes wiper arms without damage to car finish

Magnetic Pick-Up Tool

Part #: 66500

Pocket size, Telescopes from 4 1/2" to 16 1/4"

Tap Socket Set

Part #: 70500

Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards

Tap Socket Socket #9 - 5/8"

Part #: 70860

Tap Socket Socket #9 - 5/8" 16mm .480 Shank Dia. .360 Sq. Size

Tap Socket #10 - 11/16"

Part #: 70880

Tap Socket #10 - 11/16" 18mm .542 Shank dia. .406 Sq. Size

Tap Socket #11 - 3/4"

Part #: 70900

Tap Socket #11 - 3/4" .590 Shank dia. .442 Sq. Size

Tap Socket Set 3 Larger Sizes in a Convenient Set

Part #: 70940

For larger, fractional M.C.T.I. standard taps. #9 socket is 5/8" (16mm), #10 is for 11/16" (18mm) and #11 is for 3/4"

Combustion Leak Detector Replacement Fluid

Part #: 75630

Replacement Fluid for Combustion Leak Detector - 16 fluid oz.