Ford 3.8L 1988

Ford 3.8L 1988  Engine kit, cam kit and re-ring kit

If you need a  Ford 3.8L 1988 engine kit, Take a look at this!!  The lowest price kits out there with brand name components.

Ford 3.8L 1988 comes complete with top quality parts from: Federal Mogul/Sealed Power,Hastings, Melling and  Option upgrades allow for substitutions at the cost indicated. Oversizes available at no extra cost. I.E. pistons, rings and bearings sizes

Ford 3.8L 1988
Master Kit Includes: 

• Stock style Camshaft
• Stock style Lifters
• Stock style Timing set
• Stock style Pistons
• Stock style Piston Rings
• Stock style Rod Bearings
• Stock style Main Bearings
• Stock style Cam Bearings
• Stock style Balance Shaft Bearings
• Stock style Oil Pump
• Stock style Frost Plugs
• Stock style Gasket Set

Ford 3.8L 1988
Cam Kit Includes:
Includes Camshaft, Lifters, and Timing Set

• Stock style Camshaft
• Stock style Lifters
• Stock style Timing set

Ford 3.8L 1988
Re-Ring Kit Includes:
Includes Piston Rings, Rod and Main Bearings and Gasket Set

• Stock style Piston Rings
• Stock style Rod Bearings
• Stock style Main Bearings
• Stock style Gasket Set

Here are some Engine Rebuilding Tips

1. Need oversized pistons? make sure you match rings to the piston over-size
2. Never soak your lifters, just coat with a good cam lube prior to installation
3. When replacing your camshaft with a higher lift cam always buy matching springs
4. Remember to use Plastigage on your bearings to make sure of a proper oil clearance 
5. When installing any bearing Do not Attempt to Polish The Bearing Running
   Surface With Any Type Of Abrasive Pad Or Paper.
6. Use an Engine Break-in Oil Additive such as Comp Cam's #159

For more tips and information check out the great links- From Clevite
Camshaft Break-In Procedures  /  Camshaft Installation Tips  /  Crankshaft Installation Tips 
Checking Bearing Clearances  /  Engine Bearing Installation Tips   /  Oil Pump Installation

This product is in the following categories:

Manufacturer: