Ford 292 1955-1964

Ford 292 1955-1964  Engine kit, cam kit and re-ring kit

If you need a  Ford 292 1955-1964 engine kit, Take a look at this!!  The lowest price kits out there with brand name components.

The Ford 292 engine, also known as the 292 Y Block, is a classic V8 engine that was produced between 1955 and 1964. It was part of Ford's Y Block engine family, which included other popular engines such as the 239, 256, and 272. With a displacement of 292 cubic inches (4.8 liters) and an output of up to 212 horsepower, the Ford 292 engine gained a repuation for reliability and performance.

If you're the proud owner of a classic Ford vehicle with a 292 Y Block engine, youunderstand the importance of preserving its performance. Over time, your Ford 292 engine may need a rebuild to restore its former glory. With a Ford 292 rebuid kit from Northern Auto Parts, you can breathe new life into your engine and ensurea smooth ride for years to come. Order your 292 Y Block Rebuild kit, and feel the power emanating from it like it just rolled off the factory floor.

Ford 292 Rebuild Kit for models 1955-1964 comes complete with top quality parts from: Federal Mogul/Sealed Power,Hastings, Melling and optional upgrades allow for substitutions at the cost indicated. Oversizes of some parts are available at no extra cost. I.E. pistons, rings and bearings sizes.

Ford 292 Rebuild Kit 1955-1964
Master Kit Includes: 

• Stock style Camshaft and Lifters 
• Stock style Timing set
• Stock style Pistons
• Stock style Piston Rings
• Stock style Rod Bearings
• Stock style Main Bearings
• Stock style Cam Bearings
• Stock style Oil Pump
• Stock style Frost Plugs
• Stock style Gasket Set

Ford 292 Rebuild Kit 1955-1964
Cam Kit Includes:
Includes Camshaft, and Timing Set

• Stock style Camshaft and lifter
• Stock style Timing set

Ford 292 Rebuild Kit 1955-1964
Re-Ring Kit Includes:
Includes Piston Rings, Rod and Main Bearings and Gasket Set

• Stock style Piston Rings
• Stock style Rod Bearings
• Stock style Main Bearings
• Stock style Gasket Set

Here are some Engine Rebuilding Tips

1. Need oversized pistons? Make sure you match rings to the piston over-size
2. Never soak your lifters, just coat them with a good cam lube prior to installation
3. When replacing your camshaft with a higher lift cam always buy matching springs
4. Remember to use Plastigage on your bearings to make sure of a proper oil clearance 
5. When installing any bearing do not attempt to polish the bearing running surface with any type of abrasive pad or paper.
6. Use an Engine Break-in Oil Additive such as Comp Cam's #159

For more tips and information check out the great links- From Clevite
Camshaft Break-In Procedures  /  Camshaft Installation Tips  /  Crankshaft Installation Tips 
Checking Bearing Clearances  /  Engine Bearing Installation Tips   /  Oil Pump Installation

This product is in the following categories:

Manufacturer: